HP VPN Firewall Appliances Network Management Configuration Guide

294
Figure 196 QoS policy configuration procedure
Defining a class
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a class and
enter class view.
traffic classifier
classifier-name [ operator
{ and | or } ]
By default, the operator of a class is AND.
The operator of a class can be AND or OR.
• AND—A packet is assigned to a class only when
the packet matches all the criteria in the class.
• OR—A packet is assigned to a class if it matches
any of the criteria in the class.
3. Configure match
criteria.
if-match [ not ]
match-criteria
For more information, see the if-match command in
ACL and QoS Command Reference.
Defining a traffic behavior
A traffic behavior is a set of QoS actions to take on a class of traffic.
To define a traffic behavior:
Ste
p
Command
1. Enter system view.
system-view
2. Create a traffic behavior and
enter traffic behavior view
traffic behavior behavior-name
3. Configure actions in the traffic
behavior.
See the subsequent chapters, depending on the purpose of the traffic
behavior.