HP VPN Firewall Appliances Network Management Configuration Guide

296
Displaying and maintaining QoS policies
Task Command Remarks
Display traffic class
configuration.
display traffic classifier
{ system-defined | user-defined }
[ classifier-name ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Support for the system-defined keyword
depends the device model. For more
information, see this command in Network
Management Command Reference.
Display traffic
behavior
configuration.
display traffic behavior
{ system-defined | user-defined }
[ behavior-name ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Support for the system-defined keyword
depends the device model. For more
information, see this command in Network
Management Command Reference.
Display
system-defined or
user-defined QoS
policy
configuration.
display qos policy { system-defined |
user-defined } [ policy-name
[ classifier classifier-name ] ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Support for the system-defined keyword
depends the device model. For more
information, see this command in Network
Management Command Reference.
Display QoS policy
configuration on the
specified or all
interfaces.
display qos policy interface
[ interface-type interface-number ]
[ inbound | outbound ] [ pvc
{ pvc-name [ vpi/vci ] | vpi/vci } ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Configuring rate limit on a port
The rate limit on a port can be configured only in the Web interface.
The following matrix shows the feature and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI Yes
F1000-E No
F5000 No
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
To configure rate limit on a port:
1. Select Firewall > QoS > Line rate from the navigation tree.
2. Click the Setup tab.