Manualshelf

HP VPN Firewall Appliances Network Management Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
321322323324325326327328329330
302
d. Click Apply.
Figure 205 Creating a policy named policy
e. Select policy from the Policy Name list.
f. Click Add Relation.
g. Select classifier_server from the Classifier Name list. Select behavior_server from the Behavior
Name list.
h. Click Apply.
Figure 206 Configuring class-behavior associations for the policy named policy
i. Select policy from the Policy Name list.
j. Click Add Relation.
k. Select classifier_host from the Classifier Name list. Select behavior_host from the Behavior
Name list.
l. Click Apply.
8. Apply the policy named policy to the incoming packets of GigabitEthernet 0/1:
a. Select Firewall > Traffic Policing > Apply from the navigation tree.
b. Click Apply Policy.
c. Select GigabitEthernet 0/1 from the Interface Name list. Select policy from the Policy Name list.
Select Inbound from the Direction list.
d. Click Apply.
Figure 207 Applying the policy named policy to the incoming packets of GigabitEthernet 0/1