HP VPN Firewall Appliances Network Management Configuration Guide

303
Priority marking configuration example
Network requirements
As shown in Figure 208, the enterprise network of a company interconnects hosts with servers through
Firewall. The network is described as follows:
• Host A and Host B are connected to GigabitEthernet 0/1 of Firewall.
• The data server, mail server, and file server are connected to GigabitEthernet 0/2 of Firewall.
Configure a priority marking QoS policy on Firewall to meet the following requirements:
Traffic source Destination Processin
g
p
riorit
y
Host A, B Data server High
Host A, B Mail server Medium
Host A, B File server Low
Figure 208 Network diagram
Configuring the firewall
1. Configure ACL 3000 to match packets with destination address 192.168.0.1:
a. Select Firewall > ACL from the navigation tree.
b. Click Add.
c. Enter the ACL number 3000.
d. Click Apply.