HP VPN Firewall Appliances Network Management Configuration Guide

308
c. Enter the behavior name behavior_mserver.
d. Click Apply.
e. Click the icon for behavior_mserver on the behavior list.
f. Select the Dot1p box, and then select 3 in its list.
g. Click Apply.
The configuration progress dialog box appears.
h. Click Close when the progress dialog box prompts that the configuration succeeds.
9. Configure traffic behavior behavior_fserver to mark packets with local precedence value 2:
a. On the page display traffic behaviors, click Add.
b. Enter the behavior name behavior_fserver.
c. Click Apply.
d. Click the icon for behavior_fserver on the behavior list.
e. Select the Dot1p box, and then select 2 in its list.
f. Click Apply.
The configuration progress dialog box appears.
g. Click Close when the progress dialog box prompts that the configuration succeeds.
10. Create QoS policy policy_server, and configure class-behavior associations for the policy:
a. Select Firewall > QoS > Policy from the navigation tree.
b. Click Add.
c. Enter the policy name policy_server.
d. Cli
ck Apply.
Figure 215 Creating policy policy_server
e. Select policy_server from the Policy Name list above the policy list.
f. Click Add Relation.
g. Select class_dbserver in the Classifier Name list. Select behavior_dbserver in the Behavior
Name list.
h. Click Apply.