HP VPN Firewall Appliances Network Management Configuration Guide

309
Figure 216 Configuring class-behavior associations for policy policy_server
i. Select policy_server from the Policy Name list above the policy list.
j. Click Add Relation.
k. Select class_mserver in the Classifier Name list. Select behavior_mserver in the Behavior
Name list.
l. Click Apply.
m. Select policy_server from the Policy Name list above the policy list.
n. Click Add Relation.
o. Select class_fserver in the Classifier Name list. Select behavior_fserver in the Behavior Name
list.
p. Click Apply.
11. Apply policy policy_server to the outgoing packets of GigabitEthernet 0/2:
a. Select Firewall > QoS > Apply from the navigation tree.
b. Click Apply Policy.
c. Select interface GigabitEthernet 0/2 in the Interface Name list. Select policy_server in the
Policy Name list. Select Outbound in the Direction list.
d. Click Apply.
Figure 217 Applying policy policy_server to the outgoing packets of GigabitEthernet 0/2
Packet filtering configuration example
Network requirements
As shown in Fi gu re 218, Host is connected to GigabitEthernet 0/1 of Firewall.
Configure a QoS policy to filter the incoming packets whose TCP source port is not 21 on
GigabitEthernet 0/1.