HP VPN Firewall Appliances Network Management Configuration Guide

314
c. Click Apply.
Figure 226 Configuring class-behavior associations for the policy named policy
5. Apply the policy named policy to the incoming packets of GigabitEthernet 0/1:
a. Select Firewall > Traffic Policing > Apply from the navigation tree.
b. Click Apply Policy.
c. Select GigabitEthernet 0/1 from the Interface Name list. Select policy from the Policy Name list.
Select Inbound from the Direction list.
d. Click Apply.
Figure 227 Applying the policy named policy to the incoming packets of GigabitEthernet 0/1