HP VPN Firewall Appliances Network Management Configuration Guide

Figure 9 Displaying interface statistics

6. Shut down interface GigabitEthernet 0/1:

a. Click Back on the Port Statistics page.

b. Click the icon for GigabitEthernet0/1.

c. Click Disable at the end of the Interface Status line.

GigabitEthernet 0/1 is shut down, and Host A cannot access the firewall.

Managing interfaces at the CLI

Performing general configurations

This section describes the settings common to Layer 2 and Layer 3 Ethernet interfaces or subinterfaces.

For more information about the settings specific to a type of Ethernet interfaces, see "Configuring a Layer

2 Ethernet interface or subi

nterface" and "Configuring a Layer 3 Ethernet interface or subinterface."

Configuring a combo interface

The following matrix shows the feature and hardware compatibility: