HP VPN Firewall Appliances Network Management Configuration Guide

335

Ping statistics for 1.1.2.2:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 1ms, Maximum = 1ms, Average = 1ms

2. Traceroute Host A on Host B:

C:\Documents and Settings\Administrator>tracert 1.1.2.2

Tracing route to 1.1.2.2 over a maximum of 30 hops

1 <1 ms <1 ms <1 ms 1.1.6.1

2 <1 ms <1 ms <1 ms 1.1.4.1

3 1 ms <1 ms <1 ms 1.1.2.2

Trace complete.

Configuring a static route at the CLI

Before you configure a static route, complete the following tasks:

• Configure physical parameters for related interfaces.

• Configure link-layer attributes for related interfaces.

• Configure IP addresses for related interfaces.

Follow these guidelines when you configure a static route:

• The next hop address of a static route cannot be the IP address of a local interface. Otherwise, the

static route does not take effect.

• You can associate a track entry with a static route to monitor the reachability of the next hops. For

more information about Track, see High Availability Configuration Guide.

• The device supports VPN instances.

To configure a static route:

Ste

Command

Remarks

1. Enter system view.

system-view N/A