HP VPN Firewall Appliances Network Management Configuration Guide

338
Ste
p
Command Remarks
2. Configure the
source address of
echo packets.
bfd echo-source-ip ip-address
By default, the source
address of echo packets is
not configured.
For more information about
this command, see High
Availability Command
Reference.
3. Configure BFD
echo mode for a
static route.
• Method 1:
ip route-static dest-address { mask | mask-length }
interface-type interface-number next-hop-address
bfd echo-packet [ preference preference-value ]
[ tag tag-value ] [ description description-text ]
• Method 2:
ip route-static vpn-instance
s-vpn-instance-name&<1-6> dest-address { mask |
mask-length } interface-type interface-number
next-hop-address bfd echo-packet [ preference
preference-value ] [ tag tag-value ] [ description
description-text ]
Use either method.
Displaying and maintaining static routes
Task Command Remarks
Display static route
information.
display ip routing-table protocol static [ inactive | verbose ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Basic static route configuration example
Network requirements
Configure static routes in Figure 241 for interconnections between any two hosts.
Figure 241 Network diagram