HP VPN Firewall Appliances Network Management Configuration Guide

350
Figure 246 RIP interface configuration page
4. Configure RIP interface as described in Table 44.
5. Click Apply.
Table 44 Configuration items
Item Descri
p
tion
Interface Displays the RIP interface name.
Work State
Set whether to allow the receiving/sending of RIP packets on the interface:
• On—Allows the receiving/sending of RIP packets on the interface.
• Off—Disallows the receiving/sending of RIP packets on the interface.
Version
Specify a RIP version for the interface:
• Default—Indicates that the interface can send RIPv1 broadcasts and can receive
RIPv1 broadcast and unicast packets, and RIPv2 broadcast, multicast, and unicast
packets.
• RIPv1—Indicates that the interface can send RIPv1 broadcasts, and can receive
RIPv1 broadcasts and RIPv1 unicasts.
• RIPv2—Indicates that the interface can send RIPv2 multicasts and can receive RIPv2
unicasts, broadcasts and multicasts.
• RIPv2 broadcast—Indicates that the interface can send RIPv2 broadcasts and can
receive RIPv1 unicasts, and broadcasts, and RIPv2 broadcasts, multicasts and
unicasts.