HP VPN Firewall Appliances Network Management Configuration Guide

383
a. Select Network > Routing Management > OSPF from the navigation tree of Device A.
b. Select the Enable OSPF box.
Figure 263 Enabling OSPF
c. Click Apply.
The Area Configuration tab is displayed.
Figure 264 Web page displayed after OSPF is enabled
3. Configure Normal area Area 0:
a. Click Add on the Area Configuration tab.
b. Enter 0 for Area ID, select Normal for Area Type, enter 10.1.1.0 for Network Address, select
0.0.0.255 for Network Mask, and click Add Network.
c. Click Apply.