Manualshelf

HP VPN Firewall Appliances Network Management Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
421422423424425426427428429430
405
Ste
p
Command
Remarks
2. Bind OSPF MIB to an
OSPF process.
ospf mib-binding process-id
Optional.
The OSPF process with the smallest
process-id is bound with OSPF MIB
by default.
3. Enable OSPF trap
generation.
snmp-agent trap enable ospf [ process-id ]
[ ifauthfail | ifcfgerror | ifrxbadpkt |
ifstatechange | iftxretransmit |
lsdbapproachoverflow | lsdboverflow |
maxagelsa | nbrstatechange | originatelsa
| vifcfgerror | virifauthfail | virifrxbadpkt
| virifstatechange | viriftxretransmit |
virnbrstatechange ] *
Optional.
Enabled by default.
Enabling message logging
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter OSPF view.
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
N/A
3. Enable message
logging.
enable log [ config | error | state ]
By default, the function is
disabled.
Enabling the advertisement and reception of opaque LSAs
With this feature enabled, OSPF can receive and advertise Type 9, Type 10, and Type 11 opaque LSAs.
To enable the advertisement and reception of opaque LSAs:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A
2. Enter OSPF view.
ospf [ process-id | router-id router-id |
vpn-instance vpn-instance-name ] *
N/A
3. Enable the advertisement and
reception of opaque LSAs.
opaque-capability enable
Optional.
By default, the function is
disabled.
Configuring OSPF to give priority to receiving and processing hello packets
To make sure OSPF runs correctly, a router receives and processes hello packets and other protocol
packets at the same time. When the router has established neighbor relationships with multiple routers,
and the routing table size is big, the router must receive and process large numbers of packets. In this
case, you can configure OSPF to give priority to receiving and processing Hello packets to ensure stable
neighbor relationships.
To configure OSPF to give priority to receiving and processing Hello packets:
Ste
p
Command
Remarks
1. Enter system view.
system-view N/A