HP VPN Firewall Appliances Network Management Configuration Guide

421

Figure 275 Network diagram

Configuration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Configure basic OSPF:

# Configure Firewall.

<Firewall> system-view

[Firewall] router id 1.1.1.1

[Firewall] ospf

[Firewall-ospf-1] area 0

[Firewall-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[Firewall-ospf-1-area-0.0.0.0] quit

[Firewall-ospf-1] quit

# Configure Router A.

<RouterA> system-view

[RouterA] router id 2.2.2.2

[RouterA] ospf

[RouterA-ospf-1] area 0

[RouterA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterA-ospf-1-area-0.0.0.0] quit

[RouterA-ospf-1] quit

# Configure Router B.

<RouterB> system-view

[RouterB] router id 3.3.3.3

[RouterB] ospf

[RouterB-ospf-1] area 0

[RouterB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterB-ospf-1-area-0.0.0.0] quit

[RouterC-ospf-1] quit

# Configure Router C.

<RouterC> system-view

[RouterC] router id 4.4.4.4

[RouterC] ospf

[RouterC-ospf-1] area 0

[RouterC-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255

[RouterC-ospf-1-area-0.0.0.0] quit