HP VPN Firewall Appliances Network Management Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

441

442

443

444

445

446

447

448

449

450

425

Configuration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Configure basic OSPF:

# Configure Router A.

<RouterA> system-view

[RouterA] ospf 1 router-id 1.1.1.1

[RouterA-ospf-1] area 0

[RouterA-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255

[RouterA-ospf-1-area-0.0.0.0] quit

# Configure Router B.

<RouterB> system-view

[RouterB] ospf 1 router-id 2.2.2.2

[RouterB-ospf-1] area 0

[RouterB-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255

[RouterB-ospf-1-area-0.0.0.0] quit

[RouterB-ospf-1] area 1

[RouterB–ospf-1-area-0.0.0.1] network 10.2.1.0 0.0.0.255

[RouterB–ospf-1-area-0.0.0.1] quit

[RouterB-ospf-1] quit

# Configure Firewall.

<Firewall> system-view

[Firewall] ospf 1 router-id 3.3.3.3

[Firewall-ospf-1] area 1

[Firewall-ospf-1-area-0.0.0.1] network 10.2.1.0 0.0.0.255

[Firewall-ospf-1-area-0.0.0.1] quit

[Firewall-ospf-1] area 2

[Firewall–ospf-1-area-0.0.0.2] network 10.3.1.0 0.0.0.255

[Firewall–ospf-1-area-0.0.0.2] quit

[Firewall-ospf-1] quit

# Configure Router C.

<RouterC> system-view

[RouterC] ospf 1 router-id 4.4.4.4

[RouterC-ospf-1] area 2

[RouterC-ospf-1-area-0.0.0.2] network 10.3.1.0 0.0.0.255

[RouterC-ospf-1-area-0.0.0.2] quit

# Display OSPF routing information on Router B.

[RouterB] display ospf routing

OSPF Process 1 with Router ID 2.2.2.2

Routing Tables

Routing for Network

Destination Cost Type NextHop AdvRouter Area

10.2.1.0/24 2 Transit 10.2.1.1 3.3.3.3 0.0.0.1

10.1.1.0/24 2 Transit 10.1.1.2 2.2.2.2 0.0.0.0

Total Nets: 2

Intra Area: 2 Inter Area: 0 ASE: 0 NSSA: 0