HP VPN Firewall Appliances Network Management Configuration Guide

22
Displaying and maintaining an Ethernet interface or
subinterface
Task Command Remarks
Display Ethernet interface
or subinterface information.
display interface [ interface-type ] brief [ down ] [ |
{ begin | exclude | include } regular-expression ]
display interface interface-type { interface-number |
interface-number.subnumber } [ brief ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the current jumbo
frame support status of the
device and the support
status after a reboot.
display jumboframe [ | { begin | exclude |
include } regular-expression ]
For more information
about the display
jumboframe command
and hardware
compatibility, see
Network Management
Command Reference.
Clear the interface or
subinterface statistics.
reset counters interface [ interface-type
[ interface-number |
interface-number.subnumber ] ]
Available in user view.
Display information about
loopback interfaces.
display interface [ loopback ] [ brief [ down ] ] [ |
{ begin | exclude | include } regular-expression ]
display interface loopback interface-number
[ brief ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display information about
the null interface.
display interface [ null ] [ brief [ down ] ] [ | { begin
| exclude | include } regular-expression ]
display interface null 0 [ brief ] [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Clear the statistics on a
loopback interface.
reset counters interface [ loopback
[ interface-number ] ]
Available in user view.
Clear the statistics on the
null interface.
reset counters interface [ null [ 0 ] ] Available in user view.