HP VPN Firewall Appliances Network Management Configuration Guide

434

Configuring IS-IS

The term "router" in this document refers to both routers and routing-capable firewalls and firewall

modules.

IS-IS can be configured only at the CLI.

Feature and hardware compatibility

Hardware IS-IS com

atibilit

F1000-A-EI/F1000-S-EI No

F1000-E No

F5000 Yes

F5000-S/F5000-C No

VPN firewall modules No

20-Gbps VPN firewall modules No

Overview

Intermediate System-to-Intermediate System (IS-IS) is a dynamic routing protocol designed by the ISO to

operate on the connectionless network protocol (CLNP).

IS-IS was modified and extended in RFC 1195 by the IETF for application in both TCP/IP and OSI

reference models, called "Integrated IS-IS" or "Dual IS-IS."

IS-IS is an IGP used within an AS. It uses the SPF algorithm for route calculation.

IS-IS configuration task list

Task Remarks

Configuring basic

IS-IS

Enabling IS-IS

Required

Configuring the IS level and circuit level

Configuring P2P network type of an interface