HP VPN Firewall Appliances Network Management Configuration Guide

452
Enabling IS-IS SNMP trap
This task enables IS-IS to generate traps and send them to the information center of the device. The
information center determines whether to output the traps and where to output. For more information
about information center, see Network Management and Monitoring Configuration Guide.
To enable IS-IS SNMP trap:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter IS-IS view.
isis [ process-id ] [ vpn-instance vpn-instance-name ] N/A
3. Enable SNMP trap.
is-snmp-traps enable
By default, SNMP trap is
enabled.
Binding an IS-IS process with MIBs
This task allows you to bind MIB with an IS-IS process to send and collect information. For more
information about MIB, see Network Management and Monitoring Configuration Guide.
To bind an IS-IS process with MIBs:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter IS-IS view.
isis [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Bind the IS-IS process with
MIBs.
isis mib-binding process-id
By default, MIBs are bound with
IS-IS process 1.
Displaying and maintaining IS-IS
Task Command Remarks
Display brief IS-IS configuration
information.
display isis brief [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display the status of IS-IS debug
switches.
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display information about IS-IS
enabled interfaces.
display isis interface [ statistics | [ interface-type
interface-number ] [ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.