HP VPN Firewall Appliances Network Management Configuration Guide

454

Figure 280 Network diagram

Configuration procedure

1. Configure IP addresses for interfaces. (Details not shown.)

2. Configure IS-IS:

# Configure Router A.

<RouterA> system-view

[RouterA] isis 1

[RouterA-isis-1] is-level level-1

[RouterA-isis-1] network-entity 10.0000.0000.0001.00

[RouterA-isis-1] quit

[RouterA] interface gigabitethernet 1/1

[RouterA-GigabitEthernet1/1] isis enable 1

[RouterA-GigabitEthernet1/1] quit

# Configure Router B.

<RouterB> system-view

[RouterB] isis 1

[RouterB-isis-1] is-level level-1

[RouterB-isis-1] network-entity 10.0000.0000.0002.00

[RouterB-isis-1] quit

[RouterB] interface gigabitethernet 1/1

[RouterB-GigabitEthernet1/1] isis enable 1

[RouterB-GigabitEthernet1/1] quit

# Configure Firewall.

<Firewall> system-view

[Firewall] isis 1

[Firewall-isis-1] network-entity 10.0000.0000.0003.00

[Firewall-isis-1] quit

[Firewall] interface gigabitethernet 1/1

[Firewall-GigabitEthernet1/1] isis enable 1

[Firewall-GigabitEthernet1/1] quit

[Firewall] interface gigabitethernet 1/2

[Firewall-GigabitEthernet1/2] isis enable 1

[Firewall-GigabitEthernet1/2] quit