HP VPN Firewall Appliances Network Management Configuration Guide

472
BGP configuration example
In this example, Device A is the firewall.
Network requirements
In the following figure are all BGP devices. Between Device A and Device B is an EBGP connection. IBGP
speakers Device B, Device C, and Device D are fully meshed.
Figure 288 Network diagram
Configuring Device A
1. Configure IP addresses for interfaces and add interfaces to the security zones. (Details not shown.)
2. Enable BGP:
a. Select Network > Routing Management > BGP from the navigation tree of Device B.
The BGP configuration page appears.
Figure 289 Enabling BGP