HP VPN Firewall Appliances Network Management Configuration Guide

473
Figure 290 Web page displayed after you enable BGP
b. Select the Enable BGP box, and enter 65008 for AS.
c. Click Apply.
3. Configure EBGP connections:
a. Click Add in the Peer Configuration field.
The BGP peer configuration page appears.
Figure 291 Adding a BGP peer
b. Enter 200.1.1.1 for Peer IP Address and 65009 for Peer AS.
c. Click Apply.
Configuring Device B
See the configuration pages of Device A for reference.
1. Configure IP addresses for interfaces and add interfaces to the security zones. (Details not shown.)
2. Enable BGP:
a. Select Network > Routing Management > BGP from the navigation tree of Device B.
The BGP global configuration page appears.
b. Select the Enable BGP box, and enter 65009 for AS.