HP VPN Firewall Appliances Network Management Configuration Guide

475
f. Click Apply.
Verifying the configuration
1. Select Network > Routing Management > BGP from the navigation tree of Device B.
2. Click Show Peer in the Show Information field.
BGP connections are established from Device B to other devices.
Figure 292 BGP configuration result
Configuring BGP at the CLI
BGP configuration task list
In a basic BGP network, you only need to perform the following configurations:
• Enable BGP.
• Configure BGP peers or peer groups.
• Control BGP route generation.
To control BGP route distribution and path selection, you must perform other configurations.
If you configure a BGP setting for a peer group and a peer in the group, the last configuration takes
effect.
Complete the following tasks to configure BGP: