HP VPN Firewall Appliances Network Management Configuration Guide

476
Task Remarks
Configuring basic
BGP
Enabling BGP Required.
Configuring a BGP peer Required.
HP recommends
configuring BGP peer
groups on large scale BGP
networks for easy
configuration and
maintenance.
Configuring a BGP peer group
Specifying the source interface for TCP connections Optional.
Generating BGP
routes
Injecting a local network
Required.
Use at least one method.
Redistributing IGP routes
Controlling route
distribution and
reception
Configuring BGP route summarization
Optional.
Advertising a default route to a peer or peer group
Configuring BGP route distribution/reception filtering
policies
Enabling BGP and IGP route synchronization
Limiting prefixes received from a peer or peer group
Configuring BGP route dampening
Controlling BGP path
selection
Specifying a preferred value for routes received Optional.
Configuring preferences for BGP routes Optional.
Configure the default local preference Optional.
Configuring the MED attribute Optional.
Configuring the NEXT_HOP attribute Optional.
Configuring the AS_PATH attribute Optional.
Tuning and optimizing
BGP networks
Configuring the BGP keepalive interval and holdtime Optional.
Configuring the interval for sending the same update Optional.
Allowing establishment of EBGP session to an indirectly
connected peer or peer group
Optional.
Enabling the BGP ORF capability Optional.
Enabling 4-byte AS number suppression Optional.
Enabling quick reestablishment of direct EBGP session Optional.
Enabling MD5 authentication for BGP peers Optional.
Configuring BGP load balancing Optional.
Forbidding session establishment with a peer or peer
group
Optional.
Configuring BGP soft-reset Optional.
Configuring a large
scale BGP network
Configuring BGP community Optional.
Configuring a BGP route reflector Optional.
Configuring a BGP confederation Optional.