HP VPN Firewall Appliances Network Management Configuration Guide

502
Ste
p
Command Remarks
2. Enter BGP view or
BGP-VPN instance
view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ipv4-family vpn-instance
vpn-instance-name
Use either method.
3. Enable BGP route
refresh for a peer or
peer group.
peer { group-name | ip-address }
capability-advertise route-refresh
Optional.
Enabled by default.
2. Saving updates
To save all route updates from a peer or peer group:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ipv4-family vpn-instance
vpn-instance-name
Use either method.
3. Save all route updates from a
peer or peer group.
peer { group-name | ip-address }
keep-all-routes
Not saved by default.
3. Configuring manual soft-reset
If the BGP peer does not support route refresh and the peer keep-all-routes command is not
configured on the local router, determine whether to manually disconnect the session with the peer
according to the impact of the new policy.
To configure manual soft-reset:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN view:
a. bgp as-number
b. ipv4-family vpn-instance
vpn-instance-name
Use either method.
3. Enable BGP route refresh for
a peer or peer group.
peer { group-name | ip-address }
capability-advertise route-refresh
By default, BGP route
refresh is enabled.
4. Return to user view.
return N/A
5. Perform manual soft-reset.
refresh bgp { all | ip-address | group
group-name | external | internal }
{ export | import }
N/A