HP VPN Firewall Appliances Network Management Configuration Guide

535
IpPrecedence: QosLcId:
NextHop: 3.0.1.1 Interface: GigabitEthernet0/1
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 3.0.2.1 Neighbor : 3.0.1.1
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Active Adv GotQ Age: 00h05m57s
Tag: 0
Destination: 1.1.1.0/24
Protocol: BGP Process ID: 0
Preference: 140 Cost: 100
IpPrecedence: QosLcId:
NextHop: 2.0.1.1 Interface: GigabitEthernet0/2
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 2.0.2.1 Neighbor : 2.0.1.1
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Inactive Adv GotQ Age: 00h05m50s
Tag: 0
Destination: 1.1.1.0/24
Protocol: O_ASE Process ID: 1
Preference: 150 Cost: 1
IpPrecedence: QosLcId:
NextHop: 3.0.2.1 Interface: GigabitEthernet0/1
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Inactive Adv Age: 00h14m10s
Tag: 1
Destination: 1.1.1.0/24
Protocol: O_ASE Process ID: 1
Preference: 150 Cost: 1
IpPrecedence: QosLcId:
NextHop: 2.0.2.1 Interface: GigabitEthernet0/2
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor : 0.0.0.0
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Inactive Adv Age: 00h14m10s
Tag: 1
The output shows that Firewall B communicates with network 1.1.1.0/24 through the path Firewall
B<—>Router A<—>Firewall A, and the path Firewall B<—>Router B<—>Firewall A does not take
effect. Then the link Firewall B<—>Router A<—>Firewall A fails.
# Enable debugging on Firewall B.