HP VPN Firewall Appliances Network Management Configuration Guide
542
Configuring PBR in the Web interface
Recommended configuration procedure
Ste
p
Descri
p
tion
1. Configuring a policy
Required.
Create a policy and configure the policy node.
By default, no policy is created.
2. Applying a policy
Required.
You can configure local PBR or interface PBR.
• Only one policy can be referenced when local PBR is enabled. Local PBR is
not configured by default.
• Only one policy can be referenced when interface PBR is enabled. Interface
PBR is not configured by default.
IMPORTANT:
Unless otherwise required, do not configure local PBR.
Configuring a policy
Creating a policy and a policy node
1. Select Network > Routing Management > Policy Routing from the navigation tree.
The default policy configuration page appears.
Figure 307 Policy configuration page
2. Click Add.
The page for creating a policy appears.