HP VPN Firewall Appliances Network Management Configuration Guide

543
Figure 308 Creating a policy
3. Create a policy and a policy node as described in Table 57.
4. Click Apply.
Table 57 Configuration items
Item Descri
p
tion
Policy Name
Enter a policy name.
IMPORTANT:
Any spaces entered at the beginning or end of a policy name will be ignored. A policy
name containing only spaces is considered as null.
Node Index
Enter a node index of the policy.
The node with a smaller number has a higher priority and is matched first.
Matching Mode Select a matching mode for the node.
Minimum Length
Define an IP packet length match criterion. Set both the minimum and maximum lengths
or leave fields null at the same time.
IMPORTANT:
Leaving either of the fields blank will delete the match criterion.
Maximum Length
Matched ACL Enter an ACL number.
Preference
Enter an IP packet preference.
There are totally eight (in the range 0 to 7) preference levels, as shown in Table 58.
Next Hop Enter the next hop IP address.
Default Next Hop Enter the default next hop IP address.