HP VPN Firewall Appliances Network Management Configuration Guide

544
Item Descri
p
tion
Outbound Interface
Enter the outbound interface. (This option is available after you click Show Advanced.)
Non-P2P interfaces (broadcast and NBMA interfaces, such as Ethernet and
virtual-template interfaces) might have multiple next hops, and packets might not be
forwarded successfully.
Default Outbound
Interface
Enter the default outbound interface. (This option is available after you click Show
Advanced.)
Non-P2P interfaces (broadcast and NBMA interfaces, such as Ethernet and
virtual-template interfaces) might have multiple next hops, and packets might not be
forwarded successfully.
Table 58 IP preference values and keywords
Preference value
Ke
y
word
0 routine
1 priority
2 immediate
3 flash
4 flash-override
5 critical
6 internet
7 network
Configuring a policy node
To configure a node for an existing policy, use one of the following methods:
• Click Add in Figure 307 to enter the policy configurati
on page as shown in Figure 308. Enter the
name of the policy in the Policy Name field, and then configure its node.
• Click the policy name link in Figure 307 to enter the
policy node list page, as shown in Figure 309.
You can create, modify, or remove a policy node on the page. To create a policy node, click Add
to enter the policy node configuration page (the policy name cannot be modified), as shown
in Figure 310.
For descriptions of the configuration items, see "Creating a policy and a policy
node."
Figure 309 Policy node list page