HP VPN Firewall Appliances Network Management Configuration Guide

546
Figure 312 Applying a policy
4. Enable local PBR or interface PBR as described in Table 59.
5. Click Apply.
Table 59 Configuration items
Item Descri
p
tion
Apply to
Specify the policy application mode:
• Local—Enable local PBR. Unless otherwise required, do not enable local PBR.
• Interface—Enable interface PBR. Apply the policy on a selected interface.
Policy Name Enter the name of the policy to be applied.
PBR configuration example
In this example, Device A is the firewall.
Network requirements
As shown in Figure 313, configure PBR on Device A to send TCP packets received from GigabitEthernet
0/3 to the next hop 1.1.2.2 (Device B), and other packets based on the routing table.