HP VPN Firewall Appliances Network Management Configuration Guide

566
Displaying and maintaining multicast routing and forwarding
CAUTION:
The reset commands might cause multicast transmission failures.
To display and maintain multicast routing and forwarding:
Task Command Remarks
Display multicast boundary
information.
display multicast boundary [ group-address [ mask |
mask-length ] ] [ interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display multicast
forwarding table
information.
display multicast forwarding-table [ source-address
[ mask { mask | mask-length } ] | group-address
[ mask { mask | mask-length } ] | incoming-interface
{ interface-type interface-number | register } |
outgoing-interface { exclude | include | match }
{ interface-type interface-number | register } |
statistics ] * [ port-info ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display information about
the multicast routing table.
display multicast routing-table [ source-address
[ mask { mask | mask-length } ] | group-address
[ mask { mask | mask-length } ] | incoming-interface
{ interface-type interface-number | register } |
outgoing-interface { exclude | include | match }
{ interface-type interface-number | register } ] * [ |
{ begin | exclude | include } regular-expression ]
Available in any view.
Display information about
the static multicast routing
table.
display multicast routing-table static
[ source-address { mask-length | mask } ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display RPF route
information about the
specified multicast source.
display multicast rpf-info source-address
[ group-address ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Clear forwarding entries
from the multicast
forwarding table.
reset multicast forwarding-table { { source-address
[ mask { mask | mask-length } ] | group-address
[ mask { mask | mask-length } ] | incoming-interface
{ interface-type interface-number | register } } * |
all }
Available in user view.
When a forwarding
entry is removed, the
associated routing entry
is also removed.
Clear routing entries from
the multicast routing table.
reset multicast routing-table { { source-address
[ mask { mask | mask-length } ] | group-address
[ mask { mask | mask-length } ] | incoming-interface
{ interface-type interface-number | register } } * |
all }
Available in user view.
When a routing entry is
removed, the associated
forwarding entry is also
removed.
Configuration examples
This section provides examples of configuring multicast routing and forwarding on routers.