HP VPN Firewall Appliances Network Management Configuration Guide

579
Figure 334 Enabling PIM-DM
3. Enable IGMP on GigabitEthernet 0/1:
a. From the navigation tree, select Network > Routing Management > IGMP.
b. Click the icon for GigabitEthernet 0/1.
c. Select Enable for IGMP.
d. Specify the IGMP version to 2.
e. Click Apply.
Figure 335 Enabling IGMP
Configuring Device B
1. Enable multicast routing:
a. From the navigation tree, select Network > Routing Management > Multicast Routing.
b. Select Enable from the list.
c. Click Apply.
2. Enable PIM-DM on all interfaces:
a. From the navigation tree, select Network > Routing Management > PIM.
b. Click the icon for GigabitEthernet 0/1.
c. Select PIM-DM from the list.
d. Click Apply.
e. Click the icon for GigabitEthernet 0/2.
f. Select PIM-DM from the list.
g. Click Apply.
3. Enable IGMP on GigabitEthernet 0/1:
a. From the navigation tree, select Network > Routing Management > IGMP.
b. Click the icon for GigabitEthernet 0/1.
c. Select Enable for IGMP.
d. Specify the IGMP version to 2.