HP VPN Firewall Appliances Network Management Configuration Guide

580
e. Click Apply.
Configuring Device C
1. Enable multicast routing:
a. From the navigation tree, select Network > Routing Management > Multicast Routing.
b. Select Enable from the list.
c. Click Apply.
2. Enable PIM-DM on all interfaces:
a. From the navigation tree, select Network > Routing Management > PIM.
b. Click the icon for GigabitEthernet 0/1.
c. Select PIM-DM from the list.
d. Click Apply.
e. Click the icon for GigabitEthernet 0/2.
f. Select PIM-DM from the list.
g. Click Apply.
3. Enable IGMP on GigabitEthernet 0/1:
a. From the navigation tree, select Network > Routing Management > IGMP.
b. Click the icon for GigabitEthernet 0/1.
c. Select Enable for IGMP.
d. Specify the IGMP version to 2.
e. Click Apply.
Verifying the configuration
To display IGMP group information on Device B:
1. From the navigation tree, select Network > Routing Management > IGMP.
2. Click the Groups tab.
The tab page shows the IGMP multicast group information on the interfaces of Device B.
Figure 336 IGMP multicast group information on GigabitEthernet 0/1