HP VPN Firewall Appliances Network Management Configuration Guide

595
[Firewall-pim] quit
# Configure the SSM group range on Router A, Router B and Router C in the same way.
(Details not shown.)
f. Configure IGMP SSM mappings on the firewall.
[Firewall] igmp
[Firewall-igmp] ssm-mapping 232.1.1.0 24 133.133.1.1
[Firewall-igmp] ssm-mapping 232.1.1.0 24 133.133.3.1
[Firewall-igmp] quit
g. Verifying the configuration
# Display IGMP SSM mapping information for multicast group 232.1.1.1 on the public
network on the firewall.
[Firewall] display igmp ssm-mapping 232.1.1.1
Vpn-Instance: public net
Group: 232.1.1.1
Source list:
133.133.1.1
133.133.3.1
# Display information about the multicast groups created based on the configured IGMP SSM
mappings on the public network on the firewall.
[Firewall] display igmp ssm-mapping group
Total 1 IGMP SSM-mapping Group(s).
Interface group report information of VPN-Instance: public net
GigabitEthernet0/1(133.133.4.2):
Total 1 IGMP SSM-mapping Group reported
Group Address Last Reporter Uptime Expires
232.1.1.1 133.133.4.1 00:02:04 off
# Display PIM routing table information on the public network on the firewall.
[Firewall] display pim routing-table
Vpn-instance: public net
Total 0 (*, G) entry; 2 (S, G) entry
(133.133.1.1, 232.1.1.1)
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: GigabitEthernet0/3
Upstream neighbor: 192.168.4.2
RPF prime neighbor: 192.168.4.2
Downstream interface(s) information:
Total number of downstreams: 1
1: GigabitEthernet0/1
Protocol: igmp, UpTime: 00:13:25, Expires: -
(133.133.3.1, 232.1.1.1)
Protocol: pim-ssm, Flag:
UpTime: 00:13:25
Upstream interface: GigabitEthernet0/2
Upstream neighbor: 192.168.3.1
RPF prime neighbor: 192.168.3.1