HP VPN Firewall Appliances Network Management Configuration Guide

39
Figure 23 Creating VLANs
2. Configure VLAN 100 as the PVID of GigabitEthernet 0/1 (By default, all ports are access ports
and their PVIDs are all VLAN 1.):
a. Select Network > VLAN > Port from the navigation tree.
b. Click the icon for port GigabitEthernet 0/1 in the Operation column.
The page as shown in Figure 24 appears.
c. Select the Untagged option for Member Type.
d. Enter VLAN ID
100.
e. Click Apply.
Figure 24 Configuring the PVID of GigabitEthernet 0/1
3. Configure GigabitEthernet 0/1 as a hybrid port, and assign it to VLAN 2 and VLANs 6 through 50
as an untagged member:
a. Click the icon for GigabitEthernet 0/1 in the Operation column.
The page as shown in Figure 25 appears.
b. Select the Untagged option for Member Type.
c.
Enter VLAN IDs 2, 6-50.
d. Click Apply.
A dialog box appears telling you that the access port will be changed into a hybrid port.
e. Click OK in the dialog box.