HP VPN Firewall Appliances Network Management Configuration Guide

601
Configuring PIM interfaces
1. From the navigation tree, select Network > Routing Management > PIM.
Figure 340 PIM interfaces configuration page
2. Click the icon corresponding to a specific PIM interface.
Figure 341 Modifying the specified PIM interface
3. Select the operating mode for the interface.
If you do not specify any operating mode, no PIM modes are enabled on the interface.
4. Click Apply.
Configuring advanced PIM features
1. From the navigation tree, select Network > Routing Management > PIM.
2. Click Advanced Configuration.
Figure 342 PIM advanced configuration page
3. Configure the parameters, as described in Table 63.
4. Click Apply.