HP VPN Firewall Appliances Network Management Configuration Guide

41
Figure 27 Assigning GigabitEthernet 0/1 to VLAN 100 as a tagged member
5. Configure the security zone for GigabitEthernet 0/1, VLAN 2, VLANs 6 through 50, and VLAN
100. (Details not shown.)
Configuring Device B
Configure Device B in the same way Device A is configured.
Verifying the configuration
Display the port statistics of GigabitEthernet 0/1 on Device A:
1. Select Device Management > Interface from the navigation tree.
2. Click GigabitEthernet0/1 on the page that appears.
The page displaying the port statistics of GigabitEthernet 0/1 appears, as shown in Figure 28.