HP VPN Firewall Appliances Network Management Configuration Guide

42
Figure 28 Displaying the port statistics of GigabitEthernet 0/1
Configuring VLANs at the CLI
Configuring basic VLAN settings
Configuration restrictions and guidelines
• As the default VLAN, VLAN 1 cannot be created or removed.
• You cannot manually create or remove VLANs reserved for special purposes.
• To remove a protocol reserved VLAN, remove the configuration from the VLAN first, and execute the
undo vlan command.
Configuration procedure
To configure basic VLAN settings:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a VLAN and
enter its view, or create
VLANs in batch.
vlan { vlan-id1 [ to
vlan-id2 ] | all }
Optional.
By default, only the default VLAN (VLAN 1) exists
in the system.