HP VPN Firewall Appliances Network Management Configuration Guide

641
[RouterC] display pim rp-info
VPN-Instance: public net
PIM-SM BSR RP information:
Group/MaskLen: 224.0.0.0/4
RP: 10.110.9.1
Priority: 192
HoldTime: 150
Uptime: 00:03:42
Expires: 00:01:48
Group/MaskLen: 239.0.0.0/8
RP: 10.110.4.2 (local)
Priority: 192
HoldTime: 150
Uptime: 00:06:54
Expires: 00:02:41
# Display RP information on Router E.
[RouterE] display pim rp-info
VPN-Instance: public net
PIM-SM BSR RP information:
Group/MaskLen: 224.0.0.0/4
RP: 10.110.9.1 (local)
Priority: 192
HoldTime: 150
Uptime: 00:00:32
Expires: 00:01:58
PIM-SSM configuration example
1. Network requirements
As shown in Figure 352, the receivers receive VOD information through multicas
t. The receiver
groups of different organizations form stub networks, and one or more receiver hosts exist in each
stub network. The entire PIM domain is operating in the SSM mode.
Host A and Host C are multicast receivers in two stub networks.
The SSM group range is 232.1.1.0/24.
IGMPv3 runs between the firewall and N1, and between Router A, Router B, and N2.