HP VPN Firewall Appliances Network Management Configuration Guide

667
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
2.2.2.2 Up 00:10:17 ? 0 0
# Display brief information about MSDP peers on the firewall.
[Firewall] display msdp brief
MSDP Peer Brief Information of VPN-Instance: public net
Configured Up Listen Connect Shutdown Down
1 1 0 0 0 0
Peer's Address State Up/Down time AS SA Count Reset Count
1.1.1.1 Up 00:10:18 ? 0 0
When Source 1 10.110.5.100/24 sends multicast data to multicast group G 225.1.1.1, Host A joins
multicast group G. By comparing the PIM routing information displayed on Router B with that displayed
on the firewall, you can see that Router B acts now as the RP for Source 1 and Host A.
# Display PIM routing information on Router B.
[RouterB] display pim routing-table
VPN-Instance: public net
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:15:04
Upstream interface: Register
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Ethernet1/1
Protocol: igmp, UpTime: 00:15:04, Expires: -
(10.110.5.100, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: SPT 2MSDP ACT
UpTime: 00:46:28
Upstream interface: Serial2/0
Upstream neighbor: 10.110.2.2
RPF prime neighbor: 10.110.2.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Ethernet1/1
Protocol: pim-sm, UpTime: - , Expires: -
# Display PIM routing information on the firewall.
[Firewall] display pim routing-table
No information is output on the firewall.