HP VPN Firewall Appliances Network Management Configuration Guide

734
Ste
p
Command Remarks
3. Configure the interface to use
DHCPv6 for IP address
acquisition.
ipv6 address dhcp-alloc [ option-group
group-number | rapid-commit ] *
By default, An interface does
not use DHCPv6 for IP
address acquisition.
Configuring prefix acquisition
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Configure the interface to use
DHCPv6 for IPv6 prefix
acquisition.
ipv6 dhcp client pd prefix-number
[ option-group group-number |
rapid-commit ] *
By default, the interface
does not use DHCPv6 for
IPv6 prefix acquisition.
Enabling the stateless address autoconfiguration
Ste
p
Command
1. Enter system view.
system-view
2. Enter interface view.
interface interface-type interface-number
3. Enable IPv6 stateless address autoconfiguration.
ipv6 address auto
Displaying and maintaining the DHCPv6 client
Task Command Remarks
Display DHCPv6 client
information.
display ipv6 dhcp client [ interface interface-type
interface-number ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display DHCPv6 client
statistics.
display ipv6 dhcp client statistics [ interface
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display the DUID of the local
device.
display ipv6 dhcp duid [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Clear DHCPv6 client statistics.
reset ipv6 dhcp client statistics [ interface
interface-type interface-number ]
Available in user
view.