HP VPN Firewall Appliances Network Management Configuration Guide

744
Figure 384 Network diagram
Configuration procedure
Before performing the following configuration, make sure the firewall and the host are accessible to each
other through available routes, and the IPv6 addresses of the interfaces are configured as shown Figure
384.
This configuration mi
ght vary with DNS servers. The following configuration is performed on a PC
running Windows Server 2003. Make sure the DNS server supports the IPv6 DNS function so that the
server can process IPv6 DNS packets, and the interfaces of the DNS server can forward IPv6 packets.
1. Configure the DNS server:
a. Select Start > Programs > Administrative Tools > DNS.
The DNS server configuration page appears, as shown in Figure 385.
b. Right-click Forward Lookup Zones, select New Zone, and then follow the wizard to creat
e a
new zone named com.
Figure 385 Creating a zone
c. On the DNS configuration page, right-click zone com, and select Other New Records.
2::2/64 2::1/64
DNS server
Firewall
DNS client
3::1/64
1::1/64
host.com
IP network
Host