HP VPN Firewall Appliances Network Management Configuration Guide

54
from the navigation tree, and then find and select GigabitEthernet 0/1 to configure it accordingly. In
addition, specify the security zone to which GigabitEthernet 0/1 belongs.
1. Create a static MAC address entry:
a. Select Network > MAC > MAC from the navigation tree.
b. Click Add.
c. Enter MAC address 000f-e235-dc71. Select static from the Type list. Select 1 from the VLAN
list. Select GigabitEthernet0/1 from the Port list.
d. Click Apply.
Figure 35 Creating a static MAC address entry
2. Create a blackhole MAC address entry:
a. Click Add.
b. Enter MAC address 000f-e235-abcd. Select blackhole from the Type list. Select 1 from the
VLAN list.
c. Click Apply.
Figure 36 Creating a blackhole MAC address entry
3. Set the aging time for dynamic MAC address entries:
a. Select Network > MAC > Configuration from the navigation tree.
b. Select the Aging Time option and enter 500 as the aging time, as shown in Figure 37.
c. Cli
ck Apply.