HP VPN Firewall Appliances Network Management Configuration Guide

759
Configuration prerequisites
Before you apply an IPsec policy for RIPng, complete following tasks:
• Create an IPsec proposal.
• Create an IPsec policy.
For more information about IPsec policy configuration, see Security Configuration Guide.
Configuration procedure
To apply an IPsec policy in a process:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter RIPng view.
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
N/A
3. Apply an IPsec policy in the process.
enable ipsec-policy policy-name Not configured by default.
To apply an IPsec policy on an interface:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type interface-number N/A
3. Apply an IPsec policy on the
interface.
ripng ipsec-policy policy-name Not configured by default.
Displaying and maintaining RIPng
Task Command Remarks
Display configuration information
of a RIPng process.
display ripng [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude
| include } regular-expression ]
Available in any view.
Display routes in the RIPng
database.
display ripng process-id database [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display the routing information of
a specified RIPng process.
display ripng process-id route [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display RIPng interface
information.
display ripng process-id interface
[ interface-type interface-number ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Reset a RIPng process. reset ripng process-id process Available in user view.
Clear statistics of a RIPng process. reset ripng process-id statistics Available in user view.