HP VPN Firewall Appliances Network Management Configuration Guide

764
[Firewall-ripng-100] quit
[Firewall] ripng 200
[Firewall-ripng-200] import-route ripng 100
[Firewall-ripng-200] quit
# Display the routing table on Router A.
[RouterA] display ipv6 routing-table
Routing Table :
Destinations : 7 Routes : 7
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 1::/64 Protocol : Direct
NextHop : 1::1 Preference: 0
Interface : GE0/2 Cost : 0
Destination: 1::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 2::/64 Protocol : Direct
NextHop : 2::1 Preference: 0
Interface : GE0/1 Cost : 0
Destination: 2::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Destination: 4::/64 Protocol : RIPng
NextHop : FE80::200:BFF:FE01:1C02 Preference: 100
Interface : GE0/2 Cost : 4
Destination: FE80::/10 Protocol : Direct
NextHop : :: Preference: 0
Interface : NULL0 Cost : 0
Configuring RIPng IPsec policies
Network requirements
As shown in the following figure,
• Configure RIPng on the devices.
• Configure IPsec policies on the devices to authenticate and encrypt protocol packets.