HP VPN Firewall Appliances Network Management Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

801

802

803

804

805

806

807

808

809

810

782

[RouterB-ospfv3-1] router-id 2.2.2.2

[RouterB-ospfv3-1] quit

[RouterB] interface gigabitethernet 0/1

[RouterB-GigabitEthernet0/1] ospfv3 1 area 0

[RouterB-GigabitEthernet0/1] quit

[RouterB] interface gigabitethernet 0/2

[RouterB-GigabitEthernet0/2] ospfv3 1 area 1

[RouterB-GigabitEthernet0/2] quit

# Configure Router C.

<RouterC> system-view

[RouterC] ipv6

[RouterC] ospfv3 1

[RouterC-ospfv3-1] router-id 3.3.3.3

[RouterC-ospfv3-1] quit

[RouterC] interface gigabitethernet 0/1

[RouterC-GigabitEthernet0/1] ospfv3 1 area 0

[RouterC-GigabitEthernet0/1] quit

[RouterC] interface gigabitethernet 0/2

[RouterC-GigabitEthernet0/2] ospfv3 1 area 2

[RouterC-GigabitEthernet0/2] quit

# Configure Firewall.

<Firewall> system-view

[Firewall] ipv6

[Firewall] ospfv3 1

[Firewall-ospfv3-1] router-id 4.4.4.4

[Firewall-ospfv3-1] quit

[Firewall] interface gigabitethernet 0/2

[Firewall-GigabitEthernet0/2] ospfv3 1 area 2

[Firewall-GigabitEthernet0/2] quit

# Display OSPFv3 neighbor information on Router B.

[RouterB] display ospfv3 peer

OSPFv3 Area ID 0.0.0.0 (Process 1)

----------------------------------------------------------------------

Neighbor ID Pri State Dead Time Interface Instance ID

3.3.3.3 1 Full/Backup 00:00:34 GE0/1 0

OSPFv3 Area ID 0.0.0.1 (Process 1)

----------------------------------------------------------------------

Neighbor ID Pri State Dead Time Interface Instance ID

1.1.1.1 1 Full/DR 00:00:35 GE0/2 0

# Display OSPFv3 neighbor information on Router C.

[RouterC] display ospfv3 peer

OSPFv3 Area ID 0.0.0.0 (Process 1)

----------------------------------------------------------------------

Neighbor ID Pri State Dead Time Interface Instance ID