HP VPN Firewall Appliances Network Management Configuration Guide

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module

811

812

813

814

815

816

817

818

819

820

796

[RouterB] ipsec transform-set tran1

[RouterB-ipsec-transform-set-tran1] encapsulation-mode transport

[RouterB-ipsec-transform-set-tran1] transform esp

[RouterB-ipsec-transform-set-tran1] esp encryption-algorithm des

[RouterB-ipsec-transform-set-tran1] esp authentication-algorithm sha1

[RouterB-ipsec-transform-set-tran1] quit

[RouterB] ipsec policy policy001 10 manual

[RouterB-ipsec-policy-manual-policy001-10] transform-set tran1

[RouterB-ipsec-policy-manual-policy001-10] sa spi outbound esp 12345

[RouterB-ipsec-policy-manual-policy001-10] sa spi inbound esp 12345

[RouterB-ipsec-policy-manual-policy001-10] sa string-key outbound esp abcdefg

[RouterB-ipsec-policy-manual-policy001-10] sa string-key inbound esp abcdefg

[RouterB-ipsec-policy-manual-policy001-10] quit

[RouterB] ipsec transform-set tran2

[RouterB-ipsec-transform-set-tran2] encapsulation-mode transport

[RouterB-ipsec-transform-set-tran2] transform esp

[RouterB-ipsec-transform-set-tran2] esp encryption-algorithm des

[RouterB-ipsec-transform-set-tran2] esp authentication-algorithm sha1

[RouterB-ipsec-transform-set-tran2] quit

[RouterB] ipsec policy policy002 10 manual

[RouterB-ipsec-policy-manual-policy002-10] transform-set tran2

[RouterB-ipsec-policy-manual-policy002-10] sa spi outbound esp 54321

[RouterB-ipsec-policy-manual-policy002-10] sa spi inbound esp 54321

[RouterB-ipsec-policy-manual-policy002-10] sa string-key outbound esp gfedcba

[RouterB-ipsec-policy-manual-policy002-10] sa string-key inbound esp gfedcba

[RouterB-ipsec-policy-manual-policy002-10] quit

# On Firewall, create an IPsec proposal named tran2, and set the encapsulation mode to transport

mode, the security protocol to ESP, the encryption algorithm to DES, and authentication algorithm

to SHA1. Create an IPsec policy named policy002, specify the manual mode for it, reference IPsec

proposal tran2, set the SPIs of the inbound and outbound SAs to 54321, and the keys for the

inbound and outbound SAs using ESP to gfedcba.

[Firewall] ipsec transform-set tran2

[Firewall-ipsec-transform-set-tran2] encapsulation-mode transport

[Firewall-ipsec-transform-set-tran2] transform esp

[Firewall-ipsec-transform-set-tran2] esp encryption-algorithm des

[Firewall-ipsec-transform-set-tran2] esp authentication-algorithm sha1

[Firewall-ipsec-transform-set-tran2] quit

[Firewall] ipsec policy policy002 10 manual

[Firewall-ipsec-policy-manual-policy002-10] transform-set tran2

[Firewall-ipsec-policy-manual-policy002-10] sa spi outbound esp 54321

[Firewall-ipsec-policy-manual-policy002-10] sa spi inbound esp 54321

[Firewall-ipsec-policy-manual-policy002-10] sa string-key outbound esp gfedcba

[Firewall-ipsec-policy-manual-policy002-10] sa string-key inbound esp gfedcba

[Firewall-ipsec-policy-manual-policy002-10] quit

4. Apply the IPsec policies in areas:

# Configure Router A.

[RouterA] ospfv3 1

[RouterA-ospfv3-1] area 1