HP VPN Firewall Appliances Network Management Configuration Guide

801
Ste
p
Command Remarks
6. Configure IPv6 IS-IS to
filter incoming routes.
ipv6 filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name | route-policy
route-policy-name } import
Optional.
No filtering policy is defined
by default.
7. Configure IPv6 IS-IS to
redistribute routes from
another routing protocol.
ipv6 import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | [ level-1 | level-1-2
| level-2 ] | route-policy route-policy-name |
tag tag ] *
Optional.
Not configured by default.
8. Configure the maximum
number of redistributed
Level 1/Level 2 IPv6
routes.
ipv6 import-route limit number
Optional.
By default, the maximum
number of redistributed Level
1/Level 2 IPv6 routes is
130000.
9. Configure the filtering of
outgoing redistributed
routes.
ipv6 filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name | route-policy
route-policy-name } export [ protocol
[ process-id ] ]
Optional.
Not configured by default.
10. Enable route leaking.
ipv6 import-route isisv6 level-2 into level-1
[ filter-policy { acl6-number | ipv6-prefix
ipv6-prefix-name | route-policy
route-policy-name } | tag tag ] *
Optional.
Not enabled by default.
11. Specify the maximum
number of equal-cost
load balanced routes.
ipv6 maximum load-balancing number
Optional.
By default, the maximum
number of equal-cost load
balanced routes is 8.
NOTE:
The ipv6 filter-policy export command is usually used in combination with the ipv6 import-route
command. If no protocol is specified for the ipv6 filter-policy export command, routes redistributed from
all routin
g
protocols are filtered before advertisement. If a protocol is specified, only routes redistributed
from the routing protocol are filtered for advertisement.
Displaying and maintaining IPv6 IS-IS
Task Command Remarks
Display brief IPv6 IS-IS information.
display isis brief [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the status of the debug
switches.
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display IS-IS enabled interface
information.
display isis interface [ statistics |
[ interface-type interface-number ]
[ verbose ] ] [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.