HP VPN Firewall Appliances Network Management Configuration Guide

811
Configuring a description for an IPv6 peer or peer group
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family view.
ipv6-family N/A
4. Configure a description for an
IPv6 peer or peer group.
peer { ipv6-group-name |
ipv6-address } description
description-text
Optional.
Not configured by default.
The peer group to be configured with a
description must have been created.
Disabling session establishment to an IPv6 peer or peer group
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv6 address family view.
ipv6-family N/A
4. Disable session establishment to an
IPv6 peer or peer group.
peer { ipv6-group-name |
ipv6-address } ignore
Optional.
Not disabled by default.
Logging IPv6 peer or peer group state changes
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enable logging of peer changes
globally.
log-peer-change
Optional.
Enabled by default.
4. Enter IPv6 address family view.
ipv6-family N/A
5. Enable the state change logging for
an IPv6 peer or peer group.
peer { ipv6-group-name |
ipv6-address } log-change
Optional.
Enabled by default.
Controlling route distribution and reception
This task includes routing information filtering, routing policy application, and route dampening.
Configuration prerequisites
Before you configure route distribution and reception control, complete the following tasks: