HP VPN Firewall Appliances Network Management Configuration Guide

856
Displaying and maintaining IPv6 multicast routing
and forwarding
CAUTION:
The reset commands might cause IPv6 multicast transmission failures.
To display and maintain IPv6 multicast routing and forwarding:
Task Command Remarks
Display IPv6 multicast
boundary information.
display multicast ipv6 boundary { group
[ ipv6-group-address [ prefix-length ] ] | scope
[ scope-id ] } [ interface interface-type interface-number ]
[ | { begin | exclude | include } regular-expression ]
Available in any
view.
Display information about
the IPv6 multicast
forwarding table.
display multicast ipv6 forwarding-table
[ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] | incoming-interface
{ interface-type interface-number | register } |
outgoing-interface { exclude | include | match }
{ interface-type interface-number | register } | statistics ]
* [ port-info ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display information about
the IPv6 multicast routing
table.
display multicast ipv6 routing-table
[ ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] | incoming-interface
{ interface-type interface-number | register } |
outgoing-interface { exclude | include | match }
{ interface-type interface-number | register } ] * [ |
{ begin | exclude | include } regular-expression ]
Available in any
view.
Display the RPF route
information of the specified
IPv6 multicast source.
display multicast ipv6 rpf-info ipv6-source-address
[ ipv6-group-address ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Clear forwarding entries
from the IPv6 multicast
forwarding table.
reset multicast ipv6 forwarding-table
{ { ipv6-source-address [ prefix-length ] |
ipv6-group-address [ prefix-length ] | incoming-interface
{ interface-type interface-number | register } } * | all }
Available in user
view.
When a forwarding
entry is removed, the
associated routing
entry is also
removed.
Clear routing entries from
the IPv6 multicast routing
table.
reset multicast ipv6 routing-table { { ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type interface-number |
register } } * | all }
Available in user
view.
When a routing
entry is removed, the
associated
corresponding
forwarding entry is
also removed.