HP VPN Firewall Appliances Network Management Configuration Guide

893
# On Router E, configure Serial 2/1 as a C-BSR and C-RP in the global-scoped zone.
<RouterE> system-view
[RouterE] pim ipv6
[RouterE-pim6] c-bsr scope global
[RouterE-pim6] c-bsr 8001::1
[RouterE-pim6] c-rp 8001::1
[RouterE-pim6] quit
Verifying the configuration
# Display information about the BSR and locally configured C-RP on the firewall.
[Firewall] display pim ipv6 bsr-info
Elected BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Accept Preferred
Scope: 14
Uptime: 00:01:45
Expires: 00:01:25
Elected BSR Address: 1002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Uptime: 00:04:54
Next BSR message scheduled at: 00:00:06
Candidate BSR Address: 1002::2
Priority: 64
Hash mask length: 126
State: Elected
Scope: 4
Candidate RP: 1002::2(GigabitEthernet0/2)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:15
# Display information about the BSR and locally configured C-RP on Router C.
[RouterC] display pim ipv6 bsr-info
Elected BSR Address: 8001::1
Priority: 64
Hash mask length: 126
State: Accept Preferred
Scope: 14
Uptime: 00:01:45
Expires: 00:01:25
Elected BSR Address: 3002::2
Priority: 64
Hash mask length: 126